Breville CITRUS PRESS 800CPXL Manual De Instrucciones página 8

Step 4. Step 5.
Place a citrus fruit half, cut side down, Grasp the Soft Grip Handle and slowly
onto lower the Juicing Press Arm and press
the Juice Cone. down firmly until the Fruit Dome is in
contact with the fruit skin. The motor will
automatically start and the Juicing Cone
will begin to rotate. The juice will be
extracted from the fruit and flow through
the Juice Spout into the glass. The pulp
and seeds will collect in the Stainless Steel
1 4 OPERATING YOUR BREVILLE DIE CAST SERIES CITRUS PRESS
F i l t e r .
Step 6.
The Die Cast Series Citrus Press juices very
quickly so each fruit half will be juiced in a
few seconds. To automatically stop the
motor, lift the Juicing Press Arm up and
backwards to its extended position.
NOTE:The Stainless Steel Filter
should be emptied when full
with pulp and seeds. The
Filter can be emptied during
juicing by switching the
Citrus Press "OFF" at the
On/Off button and carefully
removing the Juicing Cone
and Filter. Clean and
replace Stainless Steel
Filter and Juicing Cone
before continuing to juice.
Do not allow the Stainless
Steel Filter to overfill as
this may prevent correct
operation or damage the
Step 7.
Remove the used fruit from the Juicing
Cone. Empty excess pulp and seeds from
Stainless Steel Filter as required.
Repeat Steps 4-7 to continue juicing.
OPERATING YOUR BREVILLE DIE CAST SERIES CITRUS PRESS 1 5