Cleaning
CARE, CLEANING AND STORAGE
• Always ensure that the Die Cast Series
Citrus Press is switched OFF at the
NOTE:Rinse or wash all
On/Off button and the plug is removed
removable parts
from the power outlet before cleaning,
immediately after use.
disassembling, assembling and storing
Dried citrus pulp is difficult
the appliance.
to remove and may stain. If
• Follow these instructions to clean all
any staining does occur,
surfaces or parts that come into contact
wipe the affected part/s
with food during juicing:-
with undiluted dishwashing
1. For easy cleaning – immediately after
each use rinse removable parts under
warm water to remove wet pulp. Allow
parts to air dry before reassembling.
2. For thorough cleaning - after
disassembling the appliance, all
removable parts should be washed in hot
soapy water or on the top shelf of the
dishwasher. The Motor Base and Juicing
Press Arm should be wiped with a soft,
damp cloth. All parts should be dried
thoroughly before reassembling.
• Store the cleaned and reassembled
Citrus Press in an upright position in a
cool, dry place. Never place any items on
top of the Citrus Press.
NOTE:Do not soak the Stainless
Steel Filters or other
removable parts in bleach.
Never immerse the motor
base in water or any other
l i q u i d .
CARE AND CLEANING
1 9