Recording Mode - Gima OXY 110 Guía De Uso

ENGLISH
52

4.3.3 Recording Mode

On main menu screen, move the cursor on
"Recording Mode" and press Confirm key
, then the oximeter enters into
Recording Mode Setup screen, as shown
in figure 4.6.
Figure 4.6 Recording mode setup screen
Note: When selecting "Spot-check Record" for data recording, the measuring
time should last over 10 seconds to get one spot-check reading, or no reading
value will not be recorded in Spot-check data record; When selecting "Trend Re-
cord", the measuring time should exceed 30 seconds, or no one record will be
recorded in Trend data record list.
4.3.4 SpO Record
2
On main menu screen, move the cursor on
"SpO Record" and press Confirm key ,
2
then the oximeter enters into SpO record
2
review method selecting screen, as shown
in figure 4.7.
Figure 4.7 SpO record review method
2
selecting screen
Refer to Section 4.4 for details.