Gima OXY 110 Guía De Uso página 41

41
1. Display screen: Display measurement result, trends and menus.
2. (Power/Left): Power on/off the device by longtime pressing; On menu
or sub-menu screen, short time press it to move the cursor left or adjust the
parameter values.
3. (Right/Mute): On data recall screen, longtime press this key, then the
delete dialog pops up; On measuring screen, short time press it to disable or
enable the sound. On menu or sub-menu screen, short time press it to move
the cursor right or adjust the parameter values.
4. (Rotate-lock/Up): On measuring screen, longtime pressing to enable
or disable the automatic screen orientation (on horizontal or vertical direction);
On menu or sub-menu screen, short time press it to move the cursor upwards
or adjust the parameter value.
5. (Setting/Down): On measuring screen, longtime pressing to enter into
setting screen; On menu or sub-menu screen, short time press it to move the
cursor downwards or adjust the parameter value.
6. (Menu/Confirm): Short time press it to enter into menu screen,
or to confirm the selection.
7. (Record/Back): Short time press it to enter into SpO
en, or to back to the previous level of menu.
8.
nected, or the measured value exceeds the preset alert limit value, then the
alert indicator will flash with orange color.
9. (Power saving mode indicator): If the device is set as power saving
mode, then the indicator lights up. And on measuring screen, the indicator
flashes with the pulse beep.
10. Icon: "SpO
11. Icon: "TEMP" (
12.( ): USB connector. Used for data uploading or charging
13.(
Used for connecting external DC power input for charging the built-in rechar-
geable battery via the base
(Alert indicator): If the probe is not well placed or discon-
" (
2
): Temperature Probe Connector.
): DC power input contact shoes with polarity indication.
): SpO
Probe Connector.
2
ENGLISH
record list scre-
2