Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Bobbin winding
(continued)
[]
Push the bobbin
to the right.
[_With
the free end of the thread
held in your hand,
depress
the foot control.
Stop the machine
when
the
bobbin
has made
a few turns,
and cut the thread
close
to the hole in the bobbin.
[]
[]
Depress
the foot control
again.
When
the bobbin
s fully
wound,
it stops automatically.
Return
the bobbin winder
to its original
position
by moving
the spindle
to the left.
and cut the thread.
[]
Push in the handwheel
to engage
the clutch
*
The machine
does not function
until the clutch
is
engaged.
NOTE:
The position
of the bobbin
winder
stopper
is adjustable
depending
on required
amount
of thread
on bobbin
(i.e. 1/2 full or full). Use a screwdriver
and loosen
the
screw
one turn or less. Do not take the screw
all the way
out. Adjust
the position
of the bobbin
winder
stopper.
Retighten
the screw.
[]
r
[]
f
20
Tabla de contenido
