Inversion Pin To Control The Bending Angle - Sima STAR 20 Manual De Instrucciones

6.3 INVERSION PIN TO CONTROL THE BENDING ANGLE.

The inversion pin "P" is how we select the bending angle of the plate. Depending on if the plate is moving
clockwise or counter clockwise, we have to put the pin on the left or the right of "S2".
Sensor S2, it to stop the plate turning when the inversion pin P touches it.
Sensor S1, is for stopping the plate when it returns to it´s original position.
9
S1
ENGLISH