Parts Of The Bending Plate - Sima STAR 20 Manual De Instrucciones

BEND LENGTH MEASURER: The bar length measurer can be mounted on the left or right of the machine. There are
two measuring plates for adjusting length of bend.
BENDING SUPPORT: The bending support is used for supporting multiple bars for the bend. The bending support
can be mounted on the right or left side. To reposition the bending support loosen the screw and slide the support
along.

6.2 PARTS OF THE BENDING PLATE.

The plate has
purposes.
1. Holes for pushing mandrel. Depending on the
size of bar the mandrel can be put in
different positions.
2. Screw holes for extracting the bending plate.
3. Micro plate for stopping.
4. Holes for the pivot bending pin.
8
many holes for different
ENGLISH