Trouble Shooting; Data Sheet; Bending Capacity - Sima STAR 20 Manual De Instrucciones

10. TROUBLE SHOOTING

PROBLEM
Machine won´t bend the bar
The plate bends but doesn't return to
its position
The green on light doesn't switch on
Pilot light is on but machine doesn't
work
Connection is correct at 230 or 400
but the machine isn´t moving

11. DATA SHEET

STAR-20 1,5Kw Single.
STAR-20 1,5KwThree.

12. BENDING CAPACITY.

POSSIBLE CAUSE
Not enough voltage
Not enough motor power.
The end of bend sensor
Check cables to the machine, check
supply
Machine is not well connected
Unstable supply
230v
216 Kg.
400v 214 Kg.
19
SOLUTION
Check supply
Check motor is not burnt.
Check the end of bend sensor
Check cables to the machine, check
supply
Machine is only connected in a single
phase, make sure it is
connected
Check the supply, try to
stabiliser
17 7,5
17 7,5
ENGLISH
correctly
use a