CARE AND MAINTENANCE
WARNING
mitt or allowing the grill to cool down. Failure to follow this warning could result in a severe
burn.
LP Gas Safety Requirements
For LP gas grills, the LP gas supply tank to be used must be: Constructed and marked in accordance
National Standard of Canada, CAN/CSA-B339 Cylinders, Spheres and Tubes for Transportation of
Device (OPD).
The tank should be 12 in. in diameter and 18-1/2 in. tall and be equipped with a
The tank supply system must be arranged for vapor withdrawal.
The tank used must include a collar to protect the cylinder valve.
Do not operate the gas grill indoors or in any enclosed area. If the gas grill is not in use, the gas must
be turned off at the supply tank. If the grill is to be stored indoors, disconnect the gas supply tank and
store the tank in an upright position in a cool, well-ventilated outdoor location away from your grill or
any other heat source.
that may affect the safe operation of the grill. Only the factory supplied hose and regulator must be
.
LP tank should be securely locked by the safety tank ring at all times. An unlocked tank may fall or tilt
which can cause injury or property damage. It is recommended to lock the tank all the time.
After positioning the tank in the opening, lower the safety tank ring to lock the tank. Use only a 20 lb.
gas tank.
WARNING
The pressure regulator and hose assembly supplied with the outdoor cooking gas appliance
by the outdoor cooking gas appliance manufacturer.
lowes.com/masterforge
®
25