Ecoflam MAX P 35 AB Manual De Instrucciones página 16

420010334402 Max P 35 / 45 AB
EN
Status
Waiting time «tw», other waiting states
Oil preheater on, waiting time «tw»
Ignition phase, ignition controlled
Operation, flame o.k.
Operation, flame not o.k.
Extraneous light on burner startup
Undervoltage
Fault, alarm
Error code output (refer to «Error code
table»)
Interface diagnostics
Legend:
Red blink code of
signal lamp (LED))
2 blinks
3 blinks
4 blinks
5 blinks
6 blinks
7 blinks
8 blinks
9 blinks
10 blinks
Color code table for multicolor signal lamp (LED)
Color code
❍ ...................................................................................
● ...................................................................................
● ❍ ● ❍ ● ❍ ● ❍ ● ❍ ● ❍ ● ❍ ● ❍ ● ❍ ● ❍ ● ❍
❑...................................................................................
❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍
❑ ▲ ❑ ▲ ❑ ▲ ❑ ▲ ❑ ▲ ❑ ▲ ❑ ▲ ❑ ▲ ❑ ▲ ❑ ▲ ❑ ▲
● ▲ ● ▲ ● ▲ ● ▲ ● ▲ ● ▲ ● ▲ ● ▲ ● ▲ ● ▲ ● ▲
▲...................................................................................
▲ ❍ ▲ ❍
▲ ▲ ▲
....... Steady on
❍
Off
Error code table
«AL» at Possible cause
term. 10
on No establishment of flame at the end of «TSA»
- Faulty or soiled fuel valves - Faulty or soiled flame detector
- Poor adjustment of burner, no fuel - Faulty ignition equipment
on Free
on Extraneous light on burner startup
on Free
on Free
on Too many losses of flame during operation
(limitation of the number of repetitions)- Faulty or soiled fuel valves.
- Faulty or soiled flame detector - Poor adjustment of burner.
on Time supervision oil preheater
- Oil preheater failed 5 times during prepurging
on Free
off Wiring fault or internal fault, output contacts,other faults.
on 3 times temporary fault of the output contacts
▲ ❍ ▲ ❍ ▲ ❍ ▲ ❍ ▲ ❍
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
▲
Red
●
Yellow
16
Color
Off
Yellow
Flashing yellow
Green
Flashing green
Green-red
Yellow-red
Red
▲ ❍ Flashing red
▲
Red flicker light
❑
Green