Tabla de contenido
J‐C100 Temperature Controller
The J‐C100 controller is the standard temperature controller that is supplied with the water heater. On indoor
models it is integrated into the front panel.
Dimensions (inches):
3.5 W x 4.75 H x 0.75 D
Locking the Controller
The J‐C100 controller can be locked by pressing the Priority Mode bu on and the up(+) bu on together for 5
seconds. A beep will sound confirming that the controller is locked. The display will alternately show "LOC", the
temperature se ng, and a diagnos c code if one has been ac vated. All of the controllers in the system are
also locked. To unlock the controller press the Priority Mode bu on and the up (+) bu on together for 5
seconds.
The J‐C200 controller is water resistant. Avoid splashing the controller.
NOTICE
Dimensions (inches): 8.0 W x 4.125 H x 0.875 D
Priority Mode
Bu on and
Indicator
Temperature
Selec on
Opera ng Instruc ons
Opera on Indicator
Temperature Display
Temperature Selec on
J‐C200 Spa Controller
In Use
Indicator
Jacuzzi Signature Water Heaters J‐S180/J‐S199
Temperature
Display
J-C200
Use caution when adjusting wat er temperature.
Sound
Priority Indicator
Priority Mode Bu on
Power Bu on
Bath Fill Indicator
Opera on
Bu on (Power)
Bath Fill
Power Save
Water Volume
Bath Fill
29
Tabla de contenido
