AERMEC nsb 1251 Manual De Instalación página 12

Pos.
NSB - AT- ET
Anti-vibrant position
5003 5203
1 • •
2 • •
3
4
5
6
7 • •
8 • •
9 • N.U.
10 • N.U.
11 •
12 •
13 N.U.
14 N.U.
15 • •
16 • •
17 N.U. N.U.
18 N.U. N.U.
19 • •
20 • •
21 N.U. N.U.
22 N.U. N.U.
23 • •
24 • •
AVX 517 515
N.B.: N.U. Support point and relative hole for AVX present but not involved
12
5403 5703
•
•
N.B.:
N.U.
The models from 5703 to 7203 are sent separately, 1 double module, 1
N.U.
single-module.
•
In the compositions shown hereunder, we only indicate the dimensions of
•
the bases without the 400 mm of overhang of the electrical box that will be
•
assembled in the double module, while in the single module it will be positioned
•
under the heat exchanger finned coil on the compressor side.
N.U.
So for weights and centres of gravity and relative lifting points refer to their
N.U.
compositions.
•
5703 = 8740 (NSB - 3602) + 5350 (NSB - 2101)
•
6003 = 8740 (NSB - 3602) + 5350 (NSB - 2401)
•
6303 = 9720 (NSB - 3902) + 5350 (NSB - 2401)
•
6603 = 9720 (NSB - 4202) + 5350 (NSB - 2401)
N.U.
6903 = 10700 (NSB - 4502) + 5350 (NSB - 2401)
N.U.
7203 = 10700 (NSB 4802) + 5350 (NSB - 2401)
•
•
For the connection of the two units, refer to the installation manual in the
•
electrical data section.
•
N.U.
N.U.
•
•
522 526
6003 6303
526 529
6603 6903
529 531
7203
531