General Safety Notes - EINHELL PSE 500 Instrucciones De Uso

BD-PSE-500 13.11.2001 13:57 Uhr
GB
Please read these operating
instructions thoroughly and
pay particular attention to the
safety notes. Always keep the
operating instructions together
with the jig saw.
Parts
1 Speed controller
2 Locking button
3 Operating switch
4 Sight guard
5 Chip shear protection piece
6 Saw blade
7 Rollers
8 Saw shoe
9 Conversion switch
10 Allan key
11 Power supply cable
Equipment
Continuously adjustable stroke
electronic control
2 step oscillating stroke adjust-
ment
Saw shoe adjustable up to 45˚ left
and right
Saw blade roller guidance
Sight guard and chip shear pro-
tection piece
1 universal saw blade
Allan key
2.5 meter power supply cable
Packing
dimensions: 30 x 20 x 8 cm
Weight: 2,3 kg
6
Seite 6

General safety notes

G Never use the saw in the vici-
nity of vapors or flammable
liquids
G Only use sharp saw blades.
G Always remove the saw's plug
from the mains socket before
replacing parts or cleaning.
G Protect the power supply cable
from damage. Oils, acids and
other caustic materials can
damage the cable.
G Never carry the saw by the
power supply cable.
G Never remove the plug from
the mains socket by pulling on
the cable.
G Before inserting the plug in the
mains socket, ensure that the
operating switch is not locked.
G Completely unwind the cable if
you use a cable drum. Mini-
mum cross section: 1,5 mm
G Do not overload the saw.
G Sufficiently secure all wor
pieces.
G Keep out of the reach of
children.
G Make sure you have stable
footing on ladders and similar
structures before starting free-
hand cutting.
G Always wear safety goggles.
G The power supply cable must
only be replaced by a qualified
electrician.
Maintenance
G Always keep your saw clean.
G Do not use caustic cleaning
agents to clean the plastic
housing..
G If an excessive amount of
sparks are generated, check
the carbon brushes.
G If a component of your saw is
damaged, use the enclosed
exploded diagram and parts
list to precisely identify the
required replacement part and
request it from our customer
service.
2 .
Technical data PSE
230 V ~ 50 Hz
Power
consumption: 450 Watt
PSE 500 600-3300 rpm
Stroke: 17 mm
Cutting
depth:
Angle
cut: up to 45°
Totally insulated
Noise level: LWA 90 dB (A)
Sound pressure
level: LPA 103 db(A)
Vibration a w : 3,2 m/s
FE
2