Installation & Preparation; Attire; Setup; Power Cord Connection - Mi-T-M CW Premium Serie Manual De Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WARNING
RISK OF EXPLOSION!
DO NOT OPERATE UNIT IN AN
AREA WHERE FLAMMABLE GAS
VAPORS MAY BE PRESENT. AN
ELECTRIC SPARK MAY CAUSE
AN EXPLOSION.
RISK OF BURSTING!
DO NOT STORE / OPERATE UNIT
IN A FREEZING ENVIRONMENT.
DANGER
RISK OF ELECTROCUTION!
THIS UNIT MUST BE CONNECTED
TO A PROPERLY GROUNDED
OUTLET.
DO NOT USE AN
ADAPTER OR REMOVE THE
THIRD GROUNDING PRONG.
10
INSTALLATION & PREPARATION

ATTIRE:

Proper attire is essential to your safety. It is advised to utilize whatever means
necessary to protect eyes, ears, and skin.
respiratory mask) may be required when using detergent cleaning agents with
this washer.

SETUP:

1. This unit should only be placed on a level surface to ensure proper lubrication
for the water pump while operating. NEVER spray water directly on the
unit!
2. Do not place unit in an area:
a. where there is evidence of oil or gas leaks.
b. where flammable gas vapors may be present.
3. Do not allow the unit to be exposed to rain, snow or freezing temperatures.
If any part of the unit becomes frozen; excessive pressure may build up in
the unit which could cause it to burst, resulting in possible serious injury to
the operator or bystanders.
4. Before each use, be certain the oil level is in the center of the sight glass.
If low, fill with
Mi-T-M pump oil

POWER CORD CONNECTION:

1. Make certain the motor switch is in the "OFF" position.
2. Ensure electrical supply is identical to the specifications listed on the pressure
washer data plate.
3. GROUNDING INSTRUCTIONS: This product must be grounded. If it should
malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-grounding conductor. The plug must be
plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
4. DANGER: Improper connection of the equipment-grounding conductor
can result in a risk of electrocution. Check with a qualified electrician or
service personnel if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug - if it will not fit the outlet, have a proper
outlet installed by a qualified electrician. Do not use any type of adaptor
with this product.
5. GROUND FAULT CIRCUIT INTERRUPTER PROTECTION:
a. SINGLE PHASE WITH GFCI: This pressure washer is provided with a
Ground Fault Circuit Interrupter (GFCI) built into the plug of the power
supply cord. This device provides additional protection from the risk of
electric shock. Should replacement of the plug or cord become necessary,
use only identical replacement parts that include GFCI protection.
b. SINGLE PHASE / THREE PHASE WITHOUT GFCI: To comply with the
National Electric Code (NFPA 70) and to provide additional protection
from the risk of electric shock, this pressure washer should only be
connected to a receptacle that is protected by a Ground Fault Circuit
Interrupter (GFCI).
Additional safety attire (such as
(#AW-4085-0016). DO NOT OVERFILL!
Operator's Manual

Capítulos

Tabla de contenido
loading

Tabla de contenido