Goodyear GY 33SBC Manual De Instrucciones página 16

Operating manual
Leave the engine to cool down.
Take out the spark plug and pour
1 ml of a high-grade engine oil or
two-stroke oil into the cylinder.
Slowly pull on the starter cable to
distribute the oil. Re-install the
spark plug.
Note
Take out the spark plug and pour
all the oil out of the cylinder before
starting the power tool after sto -
rage.
T roubles hooting
F ault
Engine does not start.
Engine does not run smoothly at
idling speed.
Engine does not accelerate.
Strong vibrations.
Thoroughly clean the power tool
and check for loose or damaged
parts. Repair or replace dama
ged parts and tighten loose
screws, nuts and bolts. The unit
can now be stored.
Store the power tool in a dry, clo -
sed room to prevent unauthori -
sed use or dam age. Keep the
power tool away from children.
T rans portation
Before transporting the power
tool, leave it to cool down.
Empty the fuel tank before trans -
porting the power tool! Filler cap
must be closed tightly.
Secure the power tool to prevent
it from shifting during transporta -
tion.
C aus e
Ignition switch set to 0/S T OP .
Fuel tank empty.
Intake pump not pressed down
far enough.
Engine ooded.
Old or incorrectly mixed fuel.
Dirty spark plug.
Air lter blocked.
Old or incorrectly mixed fuel.
Carburettor incorrectly set.
Petrol lter dirty.
Old or incorrectly mixed fuel.
Carburettor incorrectly set.
Damaged cutting tools or drive
parts.
Warranty
-
The warranty regulations issued by
our company or th e importer are
valid in all countries. Faults will be
repaired free of charge within the
framework of the guarantee, provi -
ded that they have been caused by
a material defect or manufacturing
error. Should you need to call upon
the warranty, please apply to the
vendor of your machine or to the
nearest agency.
Meas ure
Set switch to I/S T AR T .
Fill fuel tank.
Slowly press intake pump all the way down
10 times.
Implement the starting proc ess with the
choke lever in the operating position.
Em pty tank/ ll with fresh fuel mixture.
Replace or clean spark plug.
Clean or replace air lter.
Em pty tank/ ll with fresh fuel mixture.
Have the carburettor adjusted by a
centre.
Ha ve petrol lter rep laced by a service
centre.
Empty tank/ ll with fresh fuel mixture.
Have the carburettor adjusted by a
centre.
Switch o the
defec tive parts replac ed by a s ervice
centre.
English
service
service
immediately. Ha ve
16