Technical Specifications - Metabo TS 254 Manual Original

The machine is overloaded. Re-

duce the load before continuing to
work.
Specified maximum no-load speed is
not reached - motor not receiving suffi-
cient mains voltage:
use a shorter feed line or cable with

larger cross section
2
( 1.5 mm ).

14. Technical specifications

Voltage
Wattage
power input P
1
power output P
2
Current draw
Fuse protection min.
Protection class
Rated no-load speed (at 230V)
Cutting speed (at 230V)
Riving knife thickness
Saw blade
Saw blade diameter (outside)
Saw blade diameter (inside)
Cutting width
max. base body thickness of saw blade
Depth of cut
with saw blade vertical
at 45° saw blade tilt
max. cutting width with rip fence
max. cross-section width with angle guide
Dimensions
without machine stand (L x W x H)
with machine stand (L x W x H)
Length of saw table
Width of saw table
Machine weight with machine stand
Noise emission values according to EN 61029 *
A-sound pressure level L
pA
A-sound power level L
WA
Measuring inaccuracy (K
pA
* Emission values
Using these values, you can estimate the emissions from this power tool and compare these with the values emitted by other power
tools. The actual values may be higher or lower, depending on the particular application and the condition of the tool or power tool.
In estimating the values, you should also include work breaks and periods of low use. Based on the estimated emission values,
specify protective measures for the user - for example, any organisational steps that must be put in place.
Have power supply checked by a

qualified electrician.
Loss of cutting performance
Saw blade blunt (possibly tempering
marks on blade body):
Replace saw blade (see chapter

"Maintenance").
, K
WA)
Chip ejection blocked
No dust collector connected or suction
capacity insufficient:
increase suction capacity (air speed

 20 m/sec at chip ejection tube).
V 220 - 240 (1 50/60 Hz)
kW 2,00 kW S6 20%
kW 1.27 kW S6 20%
A 9
A 16 (time-lag)
IP 20
rpm 4200
m/s 57
mm 2,3
mm 250 - 254
mm 30
mm 2.4
mm 1.6
mm 0 ... 87
mm 0 ... 50
mm 630
mm 200
mm 740 x 750 x 355
mm 790 x 945 x 850
mm 670/970
mm 715/995
kg 33.4
dB (A) 99
dB (A) 112
dB (A) 3
ENGLISH
27