How To Assemble Your Ceiling Fan - Fanimation Camhaven FP8095 Serie Manual De Instrucciones

1. Remove the hanger ball portion from the downrod
/hanger ball assembly by loosening the set screw
in the hanger ball until the ball falls freely down the
downrod. Remove the pin from the downrod, then
remove the hanger ball. Retain the pin and
hanger ball for reinstallation in Step 5 (Figure 1).
2. Remove the hairpin clip and clevis pin from the
bottom of downrod. Retain the pin and clip for
reinstallation in Step 4 (Figure 2).
3. Loosen the two set screws in the downrod support.
Route black, blue and white lead wires through the
downrod (Figure 3).
4. Position downrod support and align the clevis pin
holes in both parts. Install the clevis pin and secure
with the hairpin clip.Tighten the two set screws
and locking nuts in the downrod support (Figure 4).
▲ WARNING
It is critical that the clevis pin in the downrod support is
properly installed and the setscrews and nuts are securely
tightened. Failure to verify that the clevis pin, hairpin clip,
setscrews and nuts are properly installed could result in the fan
falling.

How to Assemble Your Ceiling Fan

Downrod
Hanger
Ball
Hairpin
Clip
Downrod
SetScrew(2)
Hairpin
Clip
7
Figure 1
Figure 2
Figure 3
Clevis
Pin
Set Screw
Figure 4
Pin
Setscrew
Clevis Pin