Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembling Fan With the Light Kit
If you are assembling your fan without the light kit, please skip to page 14 of this manual.
NOTE:
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
light kit.
1. Disassemble the adapter/switch cup assembly from
the switch cup support plate by removing three
screws. (Figure 21)
2. Remove one of the three screws in the support
bracket at the bottom of the motor assembly.
Slightly loosen the remaining two screws. Assemble
the switch cup support plate to the support bracket
using the two key slots in the socket plate. Replace
the third screw and securely tighten all three screws
(Figure 22).
3. Connect the 2-pin connector from motor assembly
to the 2-pin connector from the adapter/switch cup
assembly. (Figure 23)
4.
A
s s
e
m
b
e l
h t
e
a
d
a
t p
r e
the assembled switch cup support plate with three
screws. (Figure 24)
s /
w
c t i
h
c
u
p
a
s s
e
m
b
y l
o
n
o t
13
Switch cup support
plate
Adapter/Switch cup
assembly
Figure 21
Switch cup
support plate
Figure 22
Figure 23
Figure 24
Capítulos
Tabla de contenido
Solución de problemas
