How To Assemble Your Ceiling Fan - Fanimation KWARTET FPS8553 Serie Manual De Instrucciones

How to Hang and Wire Your Ceiling Fan (Continued)
10. Attach the safety cable to ceiling support cable.
Slide cable clamp onto safety cable (from fan). Place
the end of cable through the loop of ceiling support
cable. Pull as much cable through loop as possible.
Feed end of cable into clamp hole and firmly tighten
screw (Figure 9). Cut off excess safety cable.
1. Align the wide tab of motor assembly to the wide
notch of ceiling bracket. Carefully secure the motor
housing onto the mounting slots on ceiling bracket
by twisting in a clockwise direction. Be sure the
receiver and all wiring are tucked into the motor
housing and is not pinched. Once the motor assembly
is flush with your ceiling, replace the previously
removed screws and securely tighten all three screws.
(Figure 1)

How to Assemble Your Ceiling Fan

Ceiling Support
Cable
Safety Cable
NOTE: Supply wires and
fan wires omitted for clarity
HARDWARE USED:
Ceiling Support
Cable Clamp
W/Screw
Ceiling Bracket
Assembly
9
Attach the safety cable
to ceiling support cable
Motor
Assembly
Figure 9
x 1
Figure 1
Wide Notch
Wide Tab
Motor
Assembly