Mitre Cuts; Changing The Saw Blade - EINHELL MK 225 Manual De Instrucciones

Anleitung MK 225 13.11.2001 15:49 Uhr
Important!
Wear ear-muffs and
goggles.

Changing the saw blade

1. Undo the hexagonal bolt.
2. Pull the guide arm off the pivot shaft 9.
3. Pull off the cover hood (snap-fastener).
4. Remove the movable saw blade guard to the front.
5. Undo the bolts holding the saw blade guard and
remove the guard. As you do so, take the
return spring off the pivot shaft 9.
6. Undo the hexagonal bolt.
7. Remove the flange.
8. Change the saw blade.
The new blade is fitted
in reverse order.
Important! Note the
direction of rotation.
(See the arrow
on the guard hood.)
Seite 9

Mitre cuts

1. Undo the hexagonal bolt (spanner size 19mm).
2. Set the angle on the scale by turning the pivot.
Switching on
Before you actuate the handle switch, make
sure that the saw blade is fitted correctly, that
all moving parts are able to run smoothly, and
that the clamping screws are tightened
securely.
GB
9