Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SAFETY
GUiDELiNES
- DEFiNiTiONS
It is important for you to read and understand this manual. The information
it contains
rebates to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols
below are used to help you recognize this information.
z_ DANG
E R: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
z_ WARNING"
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious tnjury.
Z_ CAUTION:
Incficates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTICE:
Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
GENERAL
POWER
TOOL
SAFETY
RULES
z_WARNING:
Readall safety
warnings and all instructions. Failure to
follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS
AND
INSTRUCTIONS
FOR FUTURE
REFERENCE
The term "power tool" in the warnings refers
to your mains-operated
(corded) power tool
or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet.
Never modify
the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools.
Unmodified plugs and
matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock ff your body is earthed or grounded.
c) Do not expose power tools to rain
or wet conditions.
Water entering
a power tool will increase the risk of
electric shock:
d) Do not abuse the cord. Never use
the cord for carrying,
pullingor
unplugging
the power tool. Keep
cord away from heat, oil, sharp
edges or moving
parts. Damaged or
entangled cords increase the risk of
electric shock:
e) When operating
a power tool
outdoors,
use an extension
cord
suitable
for outdoor
use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) if operating a power tool in a damp
location is unavoidable,
use a
rOUnd fault circuit interrupter
FCl) protected supply.
Use of a
GFCI reduces the risk of electric shock.
3) PERSONAL
SAFETY
a) Stay alert, watch what you are
doing and use common
sense
when operating
a power tool. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol
or medication.
A
moment of inattention while operating
power tools may result in serious
personal injury.
b) Use personal protective equipment.
Always wear eye protection.
Protective
equipment such as dust mask, nonskid
safety shoes, hard hat, or hearing
protection used for appropriate conditions
I reduce personal injuries.
c) Prevent unintentional
starting.
Ensure the switch
is in the off
position before connecting
to power
source and/or
battery pack, picking
up or carrying
the tool. Carrying
power tools with your finger on the
switch or energizing power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
f) Dress properly. Do not wear loose
clothing
or jewelry. Keep your hair,
clothing
and gloves away from
moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
g) If devices are provided for the
connection of dust extraction
and
collection facilities,
ensure these
are connected
and properly used.
Use of dust collection can reduce dust-
related hazards.
Tabla de contenido
