Tabla de contenido
Idiomas disponibles
Idiomas disponibles
and youmay have other r ights w hich v ary
from state tostate orprovince toprovince.
Should y ou have any questions, contact
themanager ofyour n earest Black+Decker
Service Center. This product isnotintended
forcommercial
use.
FREE WARNING
LABEL REPLACEMENT:
If your warning labels become illegible or
are missing, call 1-800-544-6986 for a free
replacement.
LATIN AMERICA: This warranty does not
apply to products sold in Latin America. For
products sold in Latin America, check country
specific warranty information contained in the
packaging, call the local company or see the
website for warranty information.
Problem
• AUTOSENSE Technology
doesn't work or stops
prematurely.
• Unitwill not start.
• Battery pack will not
charge.
• Unit shuts off abruptly.
TROUBLESHOOTING
Possible Cause
• AUTOSENSE
Technology
disengaged
• Tool in drill mode.
• Not enough pressure
when driving.
• Battery pack not installed
properly.
• Batterypack not charged.
• Battery pack not inserted
into charger.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
• Battery pack has reached its
maximum thermal limit.
• Out of charge. (To
maximize the lifeof the
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
Possible Solution
• Release the trigger and
depress it again to
reactivate the
AUTOSENSE technology.
• Ensure toot is in
screwdriver mode as
described in "Drill / Drive
Mode Select."
• Try again and apply
a substantial amount of
pressure to the back of
the toot.
• Check battery pack
installation.
• Check battery pack
charging requirements.
• Insert battery pack into
charger until green LED
appears.
• Plug charger into a
working
outtet.Refer to
"Important Charging
Notes" for more details.
• Movecharger and battery
pack to a surrounding air
temperature Ofoabove 40
degrees F (4.5 C) or below
105 degrees F (+40.5°C).
• Allow battery pack to
cool down.
• Place on charger and
allow to charge.
For assistance with your product, visit our website www.blackanddecker.com
for the location
of the service center nearest you or call the BLACK+DECKER help line at 1-800-544-6986
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
10
Tabla de contenido
