and water. Allowing dust to get into
your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
2_WARNING:
Use of
this tool
can
generate and/or disperse dust, which
may cause serious and permanent
respiratory
or other injury. Always use
NIOSH/OSHA approved respiratory
protection appropriate for the dust exposure.
Direct particles away from face and body.
• Wear appropriate
hearing protection
during use. Under some conditions and
duration of use, noise from this product may
contribute to hearing loss.
ZLWARNING:
ALWAYS
use safety
glasses.
Everyday eye glasses are NOT
safety glasses.
Also use face or dust
mask if cutting
operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY
EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CPA
Z94.3),
• ANSI $12.6 ($3.19) hearing protection,
• NOSH/OSHA
respiratory protection.
FUNCTIONAL
DESCRIPTION
1. Variable speed switch
2. Forward/reverse
button
3. Mode select buttons
4. Single sleeve keyless chuck
5. Battery
6. Battery release button
7. State of charger indicator
8. Screwdriver bit holder
9. LED work light
SYMBOLS
The label on your tool may include the
following symbols. The symbols and their
definitions are as follows:
V.................. volts
A .................. amperes
Hz................ hertz
W................. watts
min .............. minutes
"_ or A C ...... altemating current
- - - or DC... direct current
no ................ no load speed
(_) ................ Class I Construction
(grounded)
0 ................ earthing terminal
z_ ................ safety alert symbol
[] ................ Class II Construction
(double insulated)
.../min or rpm...revolutions or
reciprocation per minute
............ Read instruction manual
before use
................ Use proper respiratory
protection
G ................ Use proper eye protection
0 ................ Use proper hearing
protection
IMPORTANT
SAFETY
INSTRUCTIONS
FOR
BATTERY
CHARGERS
SAVE THESE iNSTRUCTiONS: This manual
contains important safety instructions for
battery chargers.
• Before using charger, read all instructions
and cautionary markings on charger battery
pack, and product us ng battery pack.
ZLWARNING:
Shock hazard. Do not
allow any liquid to get inside charger.
zLCAUTION:
Burn hazard. To reduce
the risk of injury, charge only designated
Black+Decker
batteries. Other types of
batteries may burst causing personal injury
and damage.
2_CAUTION:
Under certain conditions, with
the charger plugged in to the power supply,
the charcler can Be shorted bv foreicln material.