SWM RS 650 R 2016 Manual De Uso Y Mantenimento página 101

PADS CLEANING
Be careful that no brake fluid or any oil gets on
brake pads or discs. Clean off with alcohol any fluid
or oil that inadvertently gets on the pads or disc.
Replace the pads with new ones if they cannot be
cleaned satisfactorily.
PADS INSTALLATION
RS FRONT/SM REAR
- Install new brake pads.
- Reassemble the two pins (2) and the clips (1).
RS - FRONT
2
1
SM FRONT
- Install new brake pads.
- Install clips (3) by pushing them toward the cal-
liper.
- Install the pins (4).
- Pull clips (3) out, to make sure they are engaged
on pins (4)
WARNING*:
Do not attempt to ride the motorcycle until
the brake lever or pedal are fully effective.
"Pump" with the brake lever or pedal until the
pads are against the discs. The brake will not
function on the first application of the lever or
pedal.
REAR
1
3
SM - FRONT
3
3
4
EN - 43