Dictator DICTAMAT 50 BK Manual Tecnico página 24

Technical Manual
DICTAMAT 50 BK
2) Adjustment of the
Closing Speed
Damping Force
Page 02.060.010
E) Adjustment of the Closing Force and Speed - cont.
In order to adjust the closing speed open the door completely.
Now adjust the closing speed during the closing of the door by turning
the adjustment screw at the radial damper (Allan key 5.5 mm or slotted
screw driver) (see ill. 14).
Turning it clockwise:
Turning it anticlockwise:
Now check whether the spring closes the door out of any open position
independent from how far it had been opened. If necessary increase the
tension of the spring or reduce the damping. IMPORTANT: Pretension
the spring only when the door is completely opened!
Adjustment screw for the
closing speed
Nm
2
1,5
1
0,5
0
0 50 100
© DICTATOR TECHNIK GMBH Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1043
reduces the closing speed
increases the closing speed
Maximum adjustment LD50
LD50
LD50-2
Minimum adjustment LD50-2
150 200 U/min
Ill. 14
Ill. 15