Dictator DICTAMAT 50 BK Manual Tecnico página 22

Technical Manual
DICTAMAT 50 BK
1) Requirements
2) Fixing of the Second
Door Leaf
Page 02.060.08
D) Installation of the DICTAMAT 50 BK on Double-leaf
Doors
With a DICTAMAT 50 BK you can also move double-leaf doors.
Requirements:
- Simultaneous opening/closing of both door leafs (central closing!)
- Both leafs have the same dimensions.
- The force according to point E1 is sufficient for the double-leaf door.
Default door
actuator
with fixing
Ill. 10
to the rope
For double-leaf doors you need just one additional component: the
door actuator for the second door leaf, part no. 700090 (zinc-plated)
or 700091 (AISI 304).
Function: The door actuator for the second door leaf is fixed to the
other part (upper or lower, ill.10) of the rope so that the second door
leaf is moved automatically by the revolving rope.
Installation:

Fix the door actuator for the second door leaf (Ill. 11) approximately in
centre of the door leaf. The position has to be choosen so that the clam-
ping plate is at the height of the revolving rope it has to be attached to.
Unscrew the clamping plate, take it off, position the rope between

the two screws, cover all with the plate and tighten the screws.
Pretension the spring to about 80 mm.

Fix the tensioned spring with the rope clamp to the rope.

IMPORTANT: The door actuator for the second door leaf has to be the
last to be mounted, when the rope is already tensioned.
The spring of each door actuator has to show in the opening direction
(see ill. 10).
© DICTATOR TECHNIK GMBH Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1043
OPEN
OPEN
Door
actuator
for the
second
door leaf


Ill. 11