Dictator DICTAMAT 50 BK Manual Tecnico página 19

2) Assembling and
Installing the Radial
Damper, Determining
the Damping Direction
Ill. 3
© DICTATOR TECHNIK GMBH Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1043
C) Installation of the DICTAMAT 50 BK - cont.
The radial damper LD 50 offers many different possibilities of installation,
depending on the available space. It has to be completed with the
accessories in the plastic bag (ill. 1 of point A2).
1. step: Fixing the mounting brackets to the radial damper
- Determining at which position the brackets shall be screwed to the
radial damper.
Possible mounting positions: horizontal or vertical
The adjacent illustrations show some examples.
In case the included brackets should not be enough, there are additional
fixing accessories available.
- Screw the brackets to the radial damper
(4 screws TORX T20 are included - ill.
4, max. locking torque 2 Nm)
2. step: Fixing of the deflection pulley
- Deciding on the damping direction (the default deflection pulley has a
freewheel in one direction)
- Check in which direction the deflection pulley damps (just put it on the
axis and test)
- After having decided on the damping direction (= rotating direction of
the damper during closing), fix the deflection pulley on the axis of the
radial damper according to the illustration 5. Keep also in mind the
illustrations 2a and 2b.
Technical Manual
DICTAMAT 50 BK
Ill. 4
Ill. 5
Page 02.060.05