Safety Instructions - Dictator DICTAMAT 50 BK Manual Tecnico

1) Safety Instructions

2) Components Included
(Ill. 1)
© DICTATOR TECHNIK GMBH Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1043
A) Safety Instructions / Components Included
When installing and using the DICTAMAT 50 BK with revolving rope
make sure to observe all information and advice of this manual. During
the installation we recommend to wear protective gloves to prevent any
risk of getting hurt by sheet edges.
The casing of the spring rope pulley may never be opened as the released
spring can cause major injuries. If the spring rope pulley should for some
reason no longer work properly the complete device has to be replaced!
It has also to be assured that the spring rope pulley, the radial damper
and the idler pulley are protected in order to prevent fingers being trap-
ped (protection cover!).
The closing speed has to be adjusted at the radial damper so that the
door can easily be stopped by hand at every position, making sure
nobody will be endangered.
Spring rope pulley (closing force 25 N, 50 N or 80 N) with
bracket and 2 m of Kevlar rope
Radial damper with fixing brackets, deflection pulley and fixing
accessories (plastic bag on the photo)
Idler pulley with belt coming-off prevention device and fixing brackets,
pre-assembled
Door actuator with fixing bracket and rope tensioner
8 m steel rope Ø = 2 mm with compensation spring
Rope clamp for fixing the Kevlar rope to the revolving rope
Door actuator with rope tensioner
Rope clamp
Radial
damper
LD 50
with fixing
accessories
Technical Manual
DICTAMAT 50 BK
Idler pulley with
fixing bracket
Revolving
rope with
compensation
spring
Spring rope
pulley with
bracket
Ill. 1
Page 02.060.01