Pairing A Motorola Apx Portable Radio That Uses A Remote Speaker Microphone (Rsm); Usage (Connecting) - MSA G1 SCBA Manual De Instrucciones

Operation with Bluetooth Radios
NOTE: After the pairing tag is successfully read, a Bluetooth enabled G1 SCBA will search for a pairing
partner for 8 minutes. If a pair has not been made after 8 minutes, the G1 will stop looking for a pairing
partner. If the 8 minute time out is exceeded, the pairing process should be started over.
NOTE: After a successful pairing, if the regulator is shut off, the G1 SCBA will not remain connected to the
APX radios. As long as the G1 regulator is shut off, the APX radio is available for normal, non-Bluetooth
use. The G1 SCBA will automatically re-connect to the Motorola radio the next time an end user breathes
on the G1 regulator.
The G1 SCBA and Motorola single display radio are now paired and ready for use.

Pairing a Motorola APX portable radio that uses a Remote Speaker Microphone (RSM)

The pairing sequence for Motorola APX portable radios that utilize a RSM is the same as described above.
Please refer to the pairing sequence for either a single or two display radio to pair the portable radio to the
MSA G1 SCBA.
3.4

Usage (Connecting)

This section gives instruction about how to properly use or connect the SCBA and radio after pairing has
been established.
Connecting the SCBA to the Portable Radio
Prior to using the G1 SCBA with a Motorola radio, ensure that the SCBA and radio are paired to one another.
If necessary, clear the pairing history and re-pair both devices per the instructions
(1) Turn on the Motorola radio. It is recommended to turn on the Motorola radio first when starting up both
the SCBA and radio.
(2) After the radio is powered on, turn on the G1 SCBA via pressurization. Once the SCBA is fully powered
on, the SCBA will connect and immediately disconnect from the Motorola radio.
NOTE: As long as the user is not breathing through the regulator, the radio will function independently of
the G1, and all portable radio communications will originate and pass through the radio only.
Once breathing begins on the regulator, the radio and SCBA will connect automatically within 20 seconds.
When the connection is complete, all SCBA long range voice communication will go from the SCBA through
the portable radio.
NOTE: If the regulator is shut off, the radio and SCBA will automatically disconnect, and all portable radio
communication will go back through the radio only.
US
12 G1 SCBA
displayed in section 5.