Removing The Flat Belt - Oreck Revitalize FK50100 Serie Manual Del Usuario

REMOVING THE FLAT BELT

Flip cleaner on its back. Make sure
SpinBrush 360 Brushes are removed.
™
What belt to buy: For replacement belts please order part number 440007241 for tooth/ timing belt. To locate a dealer nearest you, please call
1.800.989.3535 or visit our website at www.oreck.com. Note: Flat belt is smooth while timing belt has teeth.
To access the belt, remove the 8 Philips
screws and remove belt and brushroll cover.
Circles show location of screws.
Using a screwdriver, remove the belt off the
motor drive and replace with new belt. To
reassemble, reverse steps.
29