Checking And Replacing Brushroll Belt - Oreck EVELATE CONTROL UK30100 Manual Del Usario

Maintenance — Checking and Replacing Brushroll Belt
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY FROM MOVING PARTS - UNPLUG
BEFORE CLEANING OR SERVICING. DO NOT USE VACUUM WITHOUT THE FILTRATION BAG IN PLACE.
1
Lay the unit flat to access the
power head nozzle. Remove the 2
screws located on the bottom side
of the service door.
18
2
Slide the service door down
and away from the unit to reveal
the (A) brushroll belt.
A
B
3
Remove the brushroll belt from the (A)
motor shaft and (B) brushroll pulley.
A