Tabla de contenido
and the type of packaging to make sure they are suitable for correct storage.
PROTECTIVE TREATMENT
1. Check that engine oil and coolant levels are up to the maximum.
3. Run engine at idle speed for 15 minutes.
7. Start engine and check for fuel and oil leaks.
8. Bring the engine to ¾ of maximum speed for 5-10 minutes.
10. Empty fuel tank completely.
13. Cover all openings to prevent dust or debris from entering engine.
96
ENGINE STORAGE
PREPARING THE ENGINE FOR OPERATION AFTER PROTECTIVE TREATMENT
1. Remove the protective sheeting.
2. Remove any areas covered to keep dust and debris out.
3. Use a cloth soaked in degreaser to remove applied protective coating.
4. Remove intake manifold.
9. Start engine and run at ¾ of maximum speed for 5-10 minutes.
Over time, a number of engine components and lubricants lose their
properties, so it is important to consider whether they need replacing, also
based on age (see Replacement table).
3
) into valves and reinstall intake manifold.
Tabla de contenido
