What's In The Box; Replacing The Lamp - NEC VT660 Informations Importantes

What's in the Box?

Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your VT660/VT560/VT460 Projector.
Projector
Soft carrying case
(24BS7201)
For North America only
Registration card
Limited warranty
For Europe only
Guarantee policy

Replacing the Lamp

After your lamp has been operating for 2000 hours (up to
3000 hours in Eco mode) or longer, the LAMP indicator in
the cabinet will blink red and the message will appear.
Even though the lamp may still be working, replace it at
2000 (up to 3000 hours in Eco mode) hours to maintain
optimal projector performance.
CAUTION
• DO NOT TOUCH THE LAMP immediately after it has
been used. It will be extremely hot. Turn the projec-
tor off, wait 60 seconds, turn off the main power
switch and then disconnect the power cable. Allow
at least one hour for the lamp to cool before han-
dling.
• DO NOT REMOVE ANY SCREWS except the lamp
cover screw and two lamp case screws. You could
receive an electric shock.
Lens cap
(24F38091)
Remote control
(7N900381)
Power cable
(US: 7N080206)
(EU: 7N080005)
CD-ROM
User's manual
E-4
Batteries
USB cable
(7N520013)
Carrying handle, Screw (M4 2)
Flathead screwdriver
(Handle: 24F38031)
(Screw: 24N06281)
(Screwdriver: 24C07231)
• The projector will turn off and go into stand by mode
after 2100 (up to 3100 hours in Eco mode) hours of
service. If this happens, be sure to replace the lamp.
If you continue to use the lamp after 2000 hours
(up to 3000 hours in Eco mode) of use, the lamp
bulb may shatter, and pieces of glass may be scat-
tered in the lamp case. Do not touch them as the
pieces of glass may cause injury. If this happens,
contact your NEC dealer for lamp replacement.
To replace the lamp:
1. Loosen the lamp cover screw until the screwdriver goes
into a freewheeling condition and remove the lamp
cover. The lamp cover screw is not removable.
String and rivet
(24C05051) (24C04531)
RGB signal cable
(7N520012)
Catch