Klugmann KO613.1TCX Instrucciones De Funcionamiento página 36

GB
ATTENTION: certain recipes use pre-heating, so put the dish in when
the oven has reached the set temperature and the display shows "PRE-
HEATING FINISHED PUT IN THE DISH"
When cooking is finished the display will flash "PROGRAM FINISHED
REMOVE THE DISH" and, at the same time, the oven will beep until you
press a key or open the door.
Note: at any moment, if you make a mistake choosing the values and/or you want to
change the settings of your recipe, you can select
start over from the beginning of the procedure.
NOTE: If you are cooking with the modified parameters of a pre-set recipe, while the
oven beeps at the end of cooking, you will see:
see how to save recipes in the next paragraph.
Personalising recipes
Once you have changed the cooking time of a preset recipe and executed it, you can
save it for the next by storing the new parameters you used (weight and cooking time).
At the end of the cooking cycle of the modified recipe, the icon below will appear and, to
save it, proceed as follows:
- with the + key select "YES"
- confirm with
- change it with + and - and confirm with
- change it with + and - and confirm with
"Recipe saved POS. 001", and so on, in ascending order
Each time you access the "PERSONAL RECIPES" menu, you will find it saved in your
recipes.
34
When finished with the settings, the display
summarizes the recipe set. The colon in the cooking
time (00:30) will be flashing to indicate that it can be
changed.
To change it, use the - + buttons.
Or select the
cooking program starts with a countdown of the preset
time on the display.
the time used is displayed,
function directly and, in this way, the
which cancels it and allows you
, the weight used appears,
, you will see the message