GB
Self clean
(only available in some models)
Turn on the oven with the power button and then press "CLEAN" key
The "START" key begins to flash waiting for confirmation of the duration time of the cycle.
The display shows three time options between 1:30 h and 3:00 h; with the
you can select the desired duration based on the accumulated dirt (see the paragraph
Cleaning and Maintenance on page 38).
After selecting the duration, press the "START" key to confirm and then press it again to
start the cycle; at this point the door immediately locks and the CLEAN and the residual
time is displayed along with the padlock symbol that shows the status of the door.
At the end of self-cleaning, the door remains locked while the oven cools. When the oven
is cool, the door unlocks and there is an intermittent beep and a message on the display.
At this point, press the ON/OFF key to end the cycle and proceed to remove the internal
residue.
The clean time can be set according to the same rules of the automatic functions, and
therefore the pyrolitic cycle can be delayed.
Touch
key in any moment to stop the oven.
The door remains locked until the oven temperature drops below the safety threshold, at
this time the control unlocks the door.
The cooling fan starts as soon as the function is selected and turns to its higher speed
when the inner parts get hot. The oven temperature is automatically set to 475°C in order
to perfectly clean the cavity.
The control also locks immediately the door in order to guarantee the user safety, given
that the temperature inside gets very hot. A lock icon on the temperature display shows
26
PYRO or self-cleaning mode. The oven is cleaned by burning
cooking residues at high temperature (about 475 °C) for from 1.5
to 3 hours. During the self-cleaning cycle, all the fumes produced
are filtered and then vented outside.
keys,