Deleting Photos Or Videos - Bushnell NatureView HD Manual De Instrucciones

Reviewing Images by Connecting the Camera to a Computer
You can always unmount the entire camera from the tree and connect its
USB port to a computer-it will be recognized as a "removable disk", without
the need to install any drivers or software. When using a PC (or Mac*) to view
photos (or video clips*), first connect the device to the computer with the
supplied USB cable. Then use commercial software with an image browser
feature, or an image browser included with the PC's operating system to
view images saved on the SD card in the folder \DCIM\100EK113. Each
new image or video will be numbered incrementally in order of the time it was
captured. For example, you will see file names such as "EK0001.JPG" or
"EK0001.AVI", etc. Through the file format suffix you can distinguish whether
the file is a still photo (with suffix .JPG) or a video (with suffix .AVI).
*video files may require additional software for viewing on a Mac.
The NatureView HD Cam supports 3 kinds of file system formats, FAT12,
FAT16, and FAT32. The default value is FAT16 to save photos and videos.
Here are some related notes:
• You don't need to be concerned about the file system format of the
NatureView HD Cam unless your equipment has problems reading
the SD card. If this happens, please format the SD card with the
NatureView HD Cam or in your computer first and then insert the
card into your NatureView HD Cam and try again.
• The default file system format of the NatureView HD Cam is FAT16,
which most computers can read. If you format an SD card for the
NatureView HD Cam in your computer, you should choose the file
system format FAT16. Normally FAT16 is recommended unless you
have another image viewer that uses FAT12 or FAT32 format.

Deleting Photos or Videos

If you see a photo or video during playback on the Color Viewer or video
monitor that you want to delete, it can be done easily without leaving SETUP
mode:
• Press the MENU key. You will see the first "Delete" screen, which lets
you selects the option to delete only the currently displayed photo/
video, or all photos/videos (see below).
• Highlight the "Delete Current" or "Delete All" option, then press OK.
• Next, select "Yes" and press OK to erase only the last displayed photo
32