Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, safety precautions to reduce the risk of fire, electric
WARNING
shock or injury to persons should be followed, including:
1. READ ALL INSTRUCTIONS BEFORE USING THIS WATER HEATER.
2. This water heater must be grounded. Connect only to properly grounded outlet.
3. Install or locate this water heater only in accordance with the provided installation
4. Use this water heater only for its intended use as described in this manual.
5. Do not use an extension cord with this water heater. If no outlet is available
6. As with any appliance, close supervision is necessary when used by children.
7. Do not operate this water heater if it is has a damaged cord or plug, if it is not
8. This water heater should be serviced only by qualified service personnel. Contact
9. Failure to service the anode rod at least once a year could cause the tank to fail
SAVE THESE INSTRUCTIONS
Technical data
MODEL
Capacity
Voltage
Power at 120 VAC
Maximum Water pressure psi
Weight (empty)
Amperage
Phases
Temperature Range
Recovery rate
WARNING
The installer should review the contents of this manual with the owner upon
completion of installation, and the manual should be left with the owner and placed in
a location close to the installation.
See "GROUNDING INSTRUCTIONS" found on "INSTALLATION INSTRUCTIONS".
instructions.
adjacent to the water heater, contact a qualified electrician to have one properly
installed near the heater.
working properly, or if it has been damaged or dropped.
a service person for examination, repair or adjustment.
and leak.
Any water heater should be installed in such a manner that if it should leak, the
resulting flow of water will not cause damage to the area in which it is installed.
National Plumbing codes require a drain pan for any water heater installation.
Failure to install one is the sole responsibility of owner and/or installer. Reference
UPC 2000 (Uniform Plumbing Code) Section 510 - Protection from Damage or
IPC 200 (International Plumbing Code) Section 504- Safety Devices.
gallons/hour
GL 2.5 Ti
gallons
2.7
VAC
110/120 for each model
Watts
1500
150
Lbs
15.5
Amps
12.50 for each model
1
F
GL 4 Ti
GL 8 Ti
4.0
7.0
1500
1500
150
150
17.3
29.5
1
1
65-145
6,8
1
Tabla de contenido
