YASKAWA V1000 Serie Guía De Referencia Rápida página 43

Main Circuit Wiring
Drive Side Wiring Hole Diameter (mm)
Drive Size Input
A 28.8
B
<1> Separate holes have been provided for input, output, and option wiring (total of 4 holes).
<2> Note that the cable gland body and locknut are usually sold separately.
Note: Main circuit wires should be multiconductor 600 V vinyl insulated line with a continuous maximum allowable temperature of over 70 C (such as ÖLFLEX® CLASSIC
100/100CY by Lapp Kabel).
Note: For single phase input, use 3 wire cable, and for 3-phase input, use 4 wire cable.
Note: Always use shielded motor cables.
Control Circuit Wiring
Drive Side Wiring Hole
<1>
Diameter (mm) Number of Holes
23 2
<1> Sealing grommets fitted to control circuit wiring holes on reception.
<2> Note that the cable gland body and locknut are usually sold separately.
Note: Main circuit wires should be multiconductor shielded line with a continuous maximum allowable temperature of over 70 C (such as ÖLFLEX® CLASSIC 110/115CY
and UNITRONIC® LiYCY (TP) by Lapp Kabel).
Dimensions - Lapp Kabel SKINTOP
Cable Glands for Control Wiring (glands are plastic)
Part No.
53015140
Body
53015040
Locknut 53019040
Cable Glands for Main Circuit Input and Output Wiring (glands are plastic)
Part No.
53015150
53015050
Body
53015160
53015060
53019050
LockNut
53019060
YASKAWA Europe TOMP_C710606_75A V1000 IP66 - Quick Start Guide
<1>
Output
28.8
37 37
Cable Gland No./Model
Body: 53015140/STR 16
Locknut: 53019040/GMP-GL16
Body: 53015040/ST 16
Locknut: 53019040/GMP-GL16
15°
SW
B
Locknut
Model PG Size
STR 16
16
ST 16
GMP-GL 16 16
Model PG Size
STR 21
21
ST 21
STR 29
29
ST 29
GMP-GL 21 21
GMP-GL 29 29
Recommended Cable Glands
Input / Output Wiring
Cable Gland No./Model
<2>
Body: 53015150/STR 21
Locknut: 53019050/GMP-GL21
Body: 53015050/ST 21
Locknut: 53019050/GMP-GL21
Body: 53015160/STR 29
Locknut: 53019060/GMP-GL29
Body: 53015060/ST 29
Locknut: 53019060/GMP-GL29
Recommended Cable Glands for I/O Wiring (Lapp Kabel)
Cable Diameter (mm)
<2>
6 to 12
9 to 14
C
Cap
D
SW
Body
Wrench Size SW (mm) A (mm)
27 -
30 33
Wrench Size SW (mm) A (mm)
34
-
42
36 39
46 50
2 Mechanical Installation
(Lapp Kabel)
Cable Diameter Tightening Torque
(mm)
9 to 16
13 to 18
11 to 22
14 to 25
Tightening Torque (Nm)
Body: 3.3
Locknut: 5.0
B (mm) C (mm)
- 44
6 -
B (mm) C (mm)
49
-
56
7
-
7
(Nm)
Body: 5.0
Locknut: 7.5
Body: 5.0
Locknut: 7.5
D (mm)
10
-
D (mm)
11
11
-
EN 11