Video Loss; System Setup - Velleman DVR4MQA Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

3) Pause
Press PLAY then press PAUSE, the image will be paused.
4) Stop
Press STOP and the DVR4MQA will stop all actions and display the incoming signal.
5) Image by image
• Press PLAY and PAUSE to pause the image. Press
• Press PLAY and PAUSE to pause the image. Press
When the very first image is shown, the DVR4MQA cannot return further.
e) Video Loss
"
" will appear on the screen if the DVR4MQA does not receive a video signal.
LOSS
f) Key Lock
Press MENU and ENTER simultaneously to lock the control keys.
Press MENU and ENTER simultaneously, enter the password (default: 0000) and press ENTER to unlock the keypad.
Locking and unlocking the keypad can also be used to switch users by entering another password.
5. System Set-up
a) Open Main Menu
Press the MENU button on the front of the device. The screen you see on the right
will be displayed.
You can use the ▲, ▼, ► and ◄ buttons to move around in the menu.
You can use "+" and "-" to increase of decrease the displayed values.
Use 'ENTER' to open a submenu/option under a submenu.
Use MENU to complete the modification of a menu option or to exit a menu.
DVR4MQA
to go to the next image ; keep it pressed to go faster.
to go to the previous image; keep it pressed to go faster.
- 8 -
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
VELLEMAN
Tabla de contenido

Solución de problemas

loading

Tabla de contenido