Velleman DVR4MQA Manual De Instrucciones página 10

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

c) Timer Programming

Press the MENU button on the front of the device and press ▲or ▼until 'TIMER' is

selected (cf. figure on the right).

Press ENTER to enter the timer menu. A screen as shown below will be displayed.

1) DAY

Press ENTER to set the day selection of the first line.

Press + or - to select the day set-up:

DAILY

: every day

MON / TUE / WED / THU / FIR / SAT / SUN: one day only

MO-FR : Monday to Friday

SA-SU : Saturday & Sunday

JAN-01 : specific date.

2) START

Set the recording start time (HH:MM).

3) END

Set the recording end time (HH:MM).

NOTE: if you want to record from 23:30 on Sunday to 00:20 on Monday, you will need to set 2 lines: one on Sunday

from 23:30 to 23:59 and one on Monday from 00:00 to 00:20. One line from Sunday 23:30 to 00:20 will result in

the DVR4MQA recording from Sunday 23:30 to 00:20 on the next Sunday...

4) IPS

Select the number of images per second (IPS).

NTSC : 1, 2, 4, 8, 15, 30 ; PAL: 1, 2, 3, 6, 12, 25

5) QUALITY

Select the recording quality: BEST, HIGH, NORM or BASE.

6) MODE

Select the recording mode:

Q-FR = quad-frame: all 4 channels simultaneously

Q-FI = quad-field: all 4 channels simultaneously at lower resolution

MUX = multiplex: the 4 channels consecutively

7) TIMER ENABLE

If you set it to 'YES' and press MENU, you can see a diagram as

shown at the right that displays what you've programmed:

DVR4MQA

(TIMER)

DAY

START END

IPS QLT

DAILY