Select Operating Mode - Fermax 94891EIc Manual De Instrucciones

Select operating mode

To configure a Guard Unit as Panic Alarms Reception Centre, and select
the alarm reception mode:
0
B
+
3
.
.
.
3
B
NOTE:
If the chosen mode is: TRANSFER, you will need to indicate which
block number the calls are to be transferred to. The number of each
Guard Unit was installed at the moment of installation.
Pag 34
1. Key in "0" to enter programming mode.
The display shows a series of dashes.
2. Press "B" and "3" repeatedly, until the dashes are
completed and the display shows the current operating
mode.
3. Use the arrow keys to select the desired operating mode.
NIGHT
DAY
TRANSFER (*)
MASTER(*)
(*) Only available in facilities with several Central Units (blo-
cks). See NOTE on the following page.
4. Press "B" when the desired operating mode comes up
on the display.
B333_ _