Initial Setup; Enter Programming Mode; Exit Programming Mode; Language Select - Fermax MDS DIRECT Serie Manual

MDS DIRECT
MDS DIRECT

INITIAL SETUP

We advise carrying out the initial configuration in line with the following steps:

ENTER PROGRAMMING MODE

To enter programming mode we must always follow these steps, to access the MAIN MENU. From the
Main Menu we can then access the different SECONDARY MENUS according to the option selected.
D i a l F l a t N u m b e r
a n d p r e s s
NOTES:
The secondary programming code 19025 can be replaced by another. See section « Change
Programming Code». The primary Programming Code CANNOT be changed.
In the first programming code
of digits selected for the system. See section «Assigning Number of Digits». Regardless of the
number of digits chosen for the system, the second programming code 19025 will always have 5
digits.
EXIT PROGRAMMING OR ANY OTHER MENU
To exit Programming Mode, the Main Menu or the different Secondary Menus, press the bell button
%
as many times as necessary.

LANGUAGE SELECT

The panel can operate in three different languages: Spanish, English and French, by selecting 1, 2 or
3, respectively. Select the desired language as explained below.
M 1 2 3 4
m Co Pa De Ci
MAIN MENU
Language
%
2
(For example, English)
Pag 40
Enter Code:
0
------
A%21A%
F I R S T
P r o g r a m m i n g
Code
A%21A%
%
P 1 2 3 4 5 6 7
2
a Tmc d P B L G
SECONDARY MENU
P 1 2 3 4 5 6 7
(1 - 3)
%
a Tmc d P B L G
OK
SECONDARY MENU
P r o g r a m m i n g C o d e :
ENTER
PROGRAMMING MODE
, the length of the same may vary depending on the number
6
(default value)
M 1 2 3 4
- - - - - p Co Pa De Ci
19025
S E C O N D
P r o g r a m m i n g
Code
Language (1 - 3)
1
M 1 2 3 4
%
m Co Pa De Ci
MAIN MENU
MAIN MENU
Spanish
1
English
2
French
3