Terms Of Use And Limitation Of Liability; Cleaning The Cat Fl Ap - Petsafe Staywell 900 Serie Manual De Instalación

Replacement Flap Fitting
Instructions
1. From the inside of the house, ensure that the 4-Way Lock is in the off
position (to all entry and exit.)
2. From the outside of the house, remove the two blanking plugs (half way
down on either side of the frame) and then remove the screws. The cat
fl ap will now come away from the door.
3. The part of the cat fl ap that is on the inside of the house should be
dismantled. To do this, remove the two small screws at the top of the frame.
4. Turn the cat fl ap over so you can see the side that displays the word
PetSafe ® . Lay it on the fl at surface and remove the main cover/chassis
(the part that says PetSafe on it).
®
5. Remove only the old fl ap and the fl ap magnet assembly, leaving the
jamb seal magnet and hinge springs in the frame.
6. Place the new fl ap into the frame ensuring that the fl ap seal magnet and
jamb seal magnet are attracting and not repelling. To ensure that this is
the case, on the fl ap, the word PetSafe
7. Replace the main cover/chassis onto the frame, by locking the pegs into
the slots at the bottom. When both pieces of plastic are fl ush, turn the
assembly over and replace the two small screws at the top of the frame.
8. Replace the cat fl ap into the hole in your door, line up the outside frame
and screw back into place. Re-cover the screw holes with the blanking
plugs and fi nally reposition the 4-Way Lock to the desired setting.
Replacement fl aps are available online at www.petsafe.net or by
contacting the Customer Care Centre. For a listing of Customer Care
Centre telephone numbers, visit our website at www.petsafe.net.
Cleaning the cat fl ap
Your cat fl ap is constructed in the highest quality material with a
toughened fl ap and has been designed to last for many years. To
maintain its appearance, occasional wiping with a damp cloth is all that
is necessary.
8
® should read from left to right.
www.petsafe.net

Terms of Use and Limitation of Liability

1. Terms of Use
Use of this Product is subject to your acceptance without modifi cation of the terms, conditions
and notices contained herein. Use of this Product implies acceptance of all such terms,
conditions and notices. If you do not wish to accept these terms, conditions and notices,
please return the Product, unused, in its original packaging and at your own cost and risk to
the relevant customer care centre together with proof of purchase for a full refund.
2. Proper Use
This Product is designed for use with pets where training is desired. The specifi c temperament
or size/weight of your pet may not be suitable for this Product (please refer to this Installation
Guide for details). Radio Systems Corporation recommends that this Product is not used if your
pet is aggressive and accepts no liability for determining suitability in individual cases. If you
are unsure whether this Product is appropriate for your pet, please consult your veterinarian
or certifi ed trainer prior to use. Proper use includes, without limitation, reviewing the entire
Installation Guide and any specifi c Caution statements.
3. No Unlawful or Prohibited Use
This Product is designed for use with pets only. This pet training device is not intended to harm,
injure or provoke. Using this Product in a way that is not intended could result in violation of
Federal, State or local laws.
4. Limitation of Liability
In no event shall Radio Systems Corporation or any of its associated companies be liable for
(i) any indirect, punitive, incidental, special or consequential damage and/or (ii) any loss or
damages whatsoever arising out of or connected with the misuse of this Product. The Purchaser
assumes all risks and liability from the use of this Product to the fullest extent permissible by law.
For the avoidance of doubt, nothing in this clause 4 shall limit Radio Systems Corporation's
liability for human death or personal injury or fraud or fraudulent misrepresentation.
5. Modifi cation of Terms and Conditions
Radio Systems Corporation reserves the right to change the terms, conditions and notices
governing this Product from time to time. If such changes have been notifi ed to you prior to
your use of this Product, they shall be binding on you as if incorporated herein.