How The System Works; Key Defi Nitions - Petsafe PIF-300-21 Manual De Adiestramiento Y Funcionamiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44

How the System Works

The PetSafe Wireless Pet Containment System
(8 lb). The system works by transmitting a radio signal up to 27.5 m (90 ft) in all directions. You temporarily defi ne the
Pet Area with Boundary Flags for a visual aid in training your pet. Your pet wears a Receiver Collar with Contact Points
that touch his neck, and, once trained, is allowed to roam freely within the Pet Area. When your pet reaches the Boundary
Zone, the Receiver Collar gives a warning beep before delivering a safe Static Correction through the Contact Points to get
his attention until he returns to the Pet Area.
Key Definitions
Transmitter: Transmits the radio signal and is the centre
of the Pet Area.
Pet Area: The area around the Transmitter where your
pet can roam freely.
Boundary Zone: A 0.6 to 1 m (2 to 3 ft) wide ring
outside the Pet Area where your pet's Receiver Collar
will begin to beep and then begin to deliver a Static
Correction. The correction will start in the Boundary
Zone and continue anywhere beyond the Pet Area. Note:
The Receiver Collar is equipped with a safety time-out feature
that will stop correcting after 30 seconds if your pet remains
outside the Pet Area.
Receiver Collar: Receives the radio signal from the
Transmitter.
Correction Level Button: Adjusts the level of Static
Correction your pet receives outside the Pet Area.
Receiver Indicator Light: Indicates the level of
correction at which the Receiver Collar is set. This light
also serves as a low battery indicator.
Contact Points: Deliver the safe Static Correction when
your pet moves into the Boundary Zone.
Power Jack: Where the Power Adapter plugs into the
Transmitter. The Transmitter is powered by a standard
220-240 volt outlet.
Boundary Switch: Adjusts the size according to the size
of the Pet Area desired.
Power Light: Indicates when the Transmitter is on.
Boundary Control Dial: Adjusts the distance from the
Transmitter to the Boundary Zone. Note: Adjusting the dial
does not change the level of Static Correction on the Receiver
Collar.
Receiver Collar
Correction
Level
Button
Washers
Contact Points
4
TM
has been proven safe, comfortable, and effective for all pets over 3.6 kg
Transmitter
Battery
Receiver
Indicator
Light
www.petsafe.net
Note: In many
neighborhoods, nearby
property lines may limit how
large the Pet Area can be.
Transmitter
P E T
Maximum 27.5m (90 ft) range
(45 average steps)
A R E A
Power Jack
Boundary Switch
Power Light
Boundary Control Dial
On/Off Switch
Tabla de contenido

Solución de problemas

loading

Tabla de contenido