Tabla de contenido
TO SET RE-LATCH TIME
The latch on your cat flap has been factory set to re-latch after 2
seconds. The time can be set between 2 and 20 seconds. The period
that you set the re-latch time will depend on your own cat and your
personal preference.
Remove the hinge cover. Press the manual button (Fig. 28), the LED will
flash and the latch will open. Press the timer button within 2 seconds
(Fig. 29). Each press of the timer button will increase the re-latch time by
one second (Fig. 29). Each time the button is pressed the cat flap will
emit a high beep. Once the time out reaches 20 seconds the timer
reverts to 2 seconds and emits a low beep.
The cat flap will automatically return to manual mode after 2 seconds or
by pressing the manual button (Fig. 29). Press the manual button again to
return to automatic mode and the LED will flash and the latch will re-lock.
FIG. 28
FIG. 29
MANUAL OPERATION
If you do not wish to use the electronic latch the cat flap can be placed
in manual mode.
Remove the hinge cover. Press the manual button once (Fig. 30) and the
latch will unlock and the LED flashes.
To place the cat flap in automatic mode press the manual button. The
latch will lock and the LED flashes.
Please note that manual mode can only be activated when the cat flap is
powered and programmed.
FIG. 30
7
Tabla de contenido
