Tabla de contenido
Idiomas disponibles
Idiomas disponibles
When threading your collar through the clasp, loop it through the clasp
exactly as illustrated. Pull on the excess collar. If it slides at all, it was not
threaded correctly.
If your dog has long or thick hair, the longer probes might be more
effective in delivering the stimulation to your dog. If the dog still has trouble
feeling the stimulation even with the longer probes, the dog's hair, in the
neck area, will need to be trimmed.
Install The Batteries in the Transmitter
The transmitter takes one (1) 9-Volt Alkaline battery. To install the
battery, follow the instructions listed below: (refer to figure 1)
• Place your finger on top of the "Pull" area of the battery door, located on
the backside of the transmitter.
• Remove the battery door by lifting up.
• Connect the battery and replace the battery door by placing the
bottom side of the battery door in first.
• To test battery, press any transmitter button. The light will glow red. If the
light does not glow or glows dimly, replace battery.
• You can expect a fresh battery to last about 4 months with average use.
Tabla de contenido
