Charge The Battery - Kensington KeyStand Manual De Inicio Rápido

LED Behavior and Explanation
LED Behavior

Charge the Battery

Charge your KeyStand before initial use or when the Charging Indicator
1 Insert the small end of the Charging Cable into the micro USB Charging Connector on
the Keyboard.
2 Insert the other end of the Charging Cable into your iPad charger.
3 Plug your iPad charger into a working outlet. The Charging Indicator Light
glows red.
4 When the Keyboard is fully charged, the Charging Indicator Light turns off.
Explanation
• If the KeyStand is off, asleep, or the battery is dead, the LEDs will remain
off.
• Initially at power-up, the Power and Bluetooth LEDs will turn on and stay
lit for 5 seconds.
• After 5 seconds the Bluetooth LED will turn off, followed by the Power
LED 0.5s later.
• When the Bluetooth Connection Button is pressed, the Power LED will
stay solidly lit, while the Bluetooth LED will begin to blink for 10 minutes
or until connected to an iPad.
• Blink pattern: ON 1s, OFF 0.5s
• Once the KeyStand is connected with your iPad, the Power LED will
remain lit and all others will go off.
• Also, if the KeyStand is awoken from sleep mode, the Power LED will turn
on immediately.
• While the KeyStand is connected to your iPad, the state of the Caps Lock
toggle is shown by the Caps Lock LED.
• When the KeyStand is plugged into a power source, the Charge LED will
turn red and turn off only when charge is completed.
5
blinks green.