Petsafe ST-100 Manual De Funcionamiento página 11

Remote Transmitter Digital Display
The display stays on for approximately 30 seconds after a button
press. After 30 seconds with no button press, the display shuts off
and the Remote Transmitter goes into battery conservation mode.
Pressing any button will turn the display back on. The symbols on the
display are explained below.
Risk of explosion if battery is replaced by
an incorrect type. Do not short circuit, mix
old and new batteries, dispose of in fi re, or
expose to water. When batteries are stored
or disposed, they must be protected from
shorting. Dispose of used batteries properly.
L indicates low stimulation levels ranging
from 1-8, and appears in the lower left corner
before the battery indicator.
H indicates high stimulation levels ranging
from 1-8, and appears in the lower right
corner after the battery indicator.
The battery indicator provides constant
awareness of your battery's power level.
Divided into segments, 3 indicates high
battery power, 2 indicates medium, 1
indicates low (replace soon) and no bars
indicate critically low (replace immediately).
Note: Red LED will fl ash 3 times every 5
seconds to indicate low battery.
P indicates Remote Transmitter is ready to
pair with Receiver Collar. Press the Stimulation
Down (-) Button through the stimulation
levels to display and begin pairing.
www.petsafe.net 11