Installation; Packaging And Unpacking; Installation (Service Technician) - Bartscher 296318 Manual De Instalación, Uso Y Mantenimiento

ENGLISH
8.

INSTALLATION

8.1.

Packaging and unpacking

During unloading
appliance follow
manufacturer placed directly on the packaging
and in this manual.
To lift and transport the product plan to use a fork
lift or stacker, and pay attention to even weight
distribution to avoid a risk of tilting of the packaging
(avoid excessive incline!).
When using a lift truck, pay attention
to the power cable and location of feet.
The packaging consists of the carton packaging
and wooden pallet. There are symbols printed on
the carton packaging that according to the
GB
international
regulations to follow when loading and unloading,
transporting and storing the appliance.
THIS
SIDE UP
8.2.

Installation (service technician)

All the stages of the installation must be carefully
planned.
The location should be equipped with all supply
connections and production waste outlet. The
location should also be properly lit and comply
with all hygiene and sanitary requirements
according to the binding regulations.
The appliance should be installed with the
minimum 5 cm clearance from the wall.
Locate the device in the horizontal position by
adjusting the individual feet.
and when installing
the information from
agreements inform about
CAUTION
KEEP DRY
GLASS
the
the
When collecting the goods check if the packaging
is complete and has not been damaged during
transport.
Any damage should be immediately reported to
the shipping company.
Unpack the appliance as soon as possible to
check if the appliance is not damaged.
Do not use a sharp object to cut the carton box. It
may damage the stainless steel inside the box.
Remove the carton packaging from bottom to top.
When unpacked check if the appliance is
according to the order.
In case of any difference inform the sales agent
the
immediately.
Do materials (nylon bags, polystyrene foam,
clips ...) in the reach of children!
Remove the protective PVC layer from the out
and inner surfaces. If possible, do not use any
metal tools.
To ensure the correct operation of
the appliance, the appliance must be
installed and operated in the thoroughly
ventilated room only.
Do not install in the vicinity of
another device which may generate high
temperatures
12
not store the packaging