Handling And Lifting Of The Burner; Burner Models Gas Xp60; Electrical System; Electrical Panel Layout - FBR GAS XP60/2CE EVO Manual De Instalación, Uso Y Mantenimiento

GB

HANDLING AND LIFTING OF THE BURNER

- Check that suitable lifting means are set for the weight of the burner and that all safety measures for handling
are taken.
- The weight of the burner is indicated in the manual.
- The lifting systems described below refer to raising the burner only.
- It is not allowed to apply additional loads to the burner during lifting.
- Take care not to damage the burner components during lifting and handling.
- Depending on the burner model, the gripping points for lifting and handling are defined.

BURNER MODELS GAS XP60 :

To lift the burner it is necessary to use a band that is passed under the burner structure as shown in the images below:

ELECTRICAL SYSTEM

ELECTRICAL PANEL LAYOUT

Please refer to elctrical panel layout supplied with the present instructions.

WORKING DIAGRAM OF THE ELECTRICAL DEVICE

Please refer to electrical device handbook supplied with the present Instructions.
GAS XP60/2CE EVO
ELECTRICAL SYSTEM
071011_2_A
11